The PMC8 SUB is a true low-frequency reference monitor which extends the bass response of your speaker system, imparting more of our signature ultra-clean, ultra-fast low end to any setup.

The PMC8 SUB can be used as a compact stand-alone subwoofer within conventional multichannel systems, or as an XBD cabinet, creating a full-range PMC6 XBD midfield monitor. When used in this way, the dedicated ‘XBD’ DSP mode marries the speakers and sub unit together, creating a coherent full-range system. Our subs are also perfectly suited to use in multi-channel and immersive systems, as our ATL™ bass-loading technology provides a gentler low-order LF roll-off than conventional ported cabinets, allowing a smoother, seamless integration between the height and surround channels and the sub.

Featuring one custom eight-inch long-throw bass-driver, the PMC8 SUB is powered by a single 300W Class-D amplifier and controlled by the same powerful DSP engine as our other active models. DSP facilities include sophisticated room boundary equalisation options, parametric EQ, time delay, phase inversion, and the unique XBD mode, all configured via the loudspeaker’s rear panel or the browser-based SoundAlign™ software.
 

PMC 8 SUB

£0.00 £2,880.00 inc. VAT
£2,400.00 exc. VAT
QTY:
ADD TO YOUR WISHLIST
  • Active subwoofer with an 8-inch bass driver and ATL™ bass loading
  • Frequency response: 25Hz - 500Hz (- 3dB) (@1m full space, on-axis)    
  • Max. cont. SPL: 109dB @1m (quarter space value calculated as +3dB from half space measurement.
    Unweighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • State-of-the-art Class-D amplifier: 300W
  • Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate)
  • Digital ‘through’ output (AES3 24-bit 96kHz)
  • SoundAlign™ network control interface for single or group EQ & settings
  • Sophisticated DSP driver protection, EQ, and delay/phase options
  • Dedicated XBD configuration mode

TypeActive subwoofer with an 8-inch bass driver and ATL™ bass loading 


Drive Unit ComplementLF PMC 200mm (8”) studio 8 driver 


Effective ATL™ Length3m (9.8ft) 


Frequency Response25Hz - 500Hz (- 3dB) (@1m full space, on-axis) 


Sensitivity+4dBu input signal = 98dB SPL @ 1m 


Max continuous SPL109dB @1m (Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration) 


Max Peak SPL121dB @1m (Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration) 


InputXLR switchable between analogue & digital AES3 Analogue input- +20/+24dBu max. input level (selectable) - 22K ohm input impedance Digital input- 16/24-bit AES3 signal, left, right or left + right - 18 - 192kHz Sample Rate - 110 ohm input impedance Expansion card slotFor future connectivity upgrades 


OutputXLR digital AES3 (fixed 24-bit @ 96kHz) 


NetworkRJ45 for use with PMC SoundAlign web interface 


FeaturesLevel Trim (+/-10dB) High-pass/Low-pass filter (20 - 200Hz, 12dB/Oct) Delay (0 - 30mS) Phase (normal or inverted) LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707) Parametric EQ (5 bands, 20Hz - 20kHz, +/- 10dB) User presets (3 + factory defaults) 


Latency2.4mS 


Amplifier power300Wrms 


Mains100 - 240VAC auto-switching, 50-60Hz (IEC C14) 


Power consumption (idle)25W 


Power consumption (max)300W 


Cabinet dimensionsH 266mm (10.5”) W 551mm (21.7”) D 440mm (17.3”) 


Weight18.5kg (40.8lbs) each 


Available Finishes: Studio black