Features

  • Military grade -10dB pad and 80Hz roll off switches. 
  • "Hand Selected" Russian made 6072A tube.
  • Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability.
  • The versatile BV-12 mic is able to produce professional results with a warm, pleasing sonic character.
  • The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.
  • The PS-1 power supply offers access not only to the above OMNI, CARDIOID, and FIGURE-8 patterns but also 6 "in-between" settings. Most vocals will be best suited to Cardioid pattern but you may experiment to satisfy yourself. The omni-mode works well in some rooms for ambient room mic usage.
  • -10 dB pad & 80 Hz LF roll off switches.
  • Uses Include: Studio vocals, acoustic guitar, mandolin, drum overheads, piano, room mic, etc...
  • Standard Items Supplied:
    • Avantone BV-12 Tube Microphone
    • Avantone Custom Retro Shockmount
    • Avantone PS-1 Multi-Pattern Power Supply
    • Mogami GoldStudio Pro 15' XLR Cable
    • Elegant padded genuine wooden Mic box
    • Handcrafted wood side, tweed travel case
    • Owners Manual

Avantone BV12

AV-BV12
£0.00 £1,500.00 inc. VAT
£1,250.00 exc. VAT
QTY:
ADD TO YOUR WISHLIST

BV12 Large Capsule Multi-Pattern FET Conderser Microphone

The AVANTONE "Buttercream (B-series)" mics from Avantone Pro are our premium products designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics. The AVANTONE BV-12 is truly a gorgeous looking and sounding microphone. The design, character and performance is comparable to some of the fine vintage tube mics of the 1950's and 1960's...but at a fraction of their cost!

The rugged BV-12 microphone body and capsule assembly are precision machined of BRASS. Aesthetically, it features an elegant Buttercream baked on finish, accented with polished nickel trim and grill. The transformer coupled tube circuitry has its origins in famous European vintage designs.

Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability. Any studio can proudly offer the BV-12 as a primary vocal mic...It exudes class visually as well as sonically. The versatile AVANTONE BV-12 mic is able to produce professional results with a warm, pleasing sonic character. 

The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the unwanted vibrations up into the mic. This isolation allows for superior professional results. 9-Pattern Tube microphone with dual 34mm gold sputtered thin Mylar capsule assemblies.

Included Accessories
  • Wood Box
  • Shockmount
  • 7-pin cable
  • Tweed Road Case
  • PS-1 Power Supply
Specifications
Tube Type
Tube-Type True Condenser
Polar Pattern(s)
9 Patterns selectable at PS-1 Power Supply
Capsule
Dual-sided 34mm edge-terminated gold-sputtered Mylar (6 micron)
Frequency Response
20-20,000Hz +/- 3dB
Output Impedance
<=250 Ohms / transformer isolated
Sensitivity
-38dB
S/N Ratio
re 1Pa 78dB
Noise Floor
 < 17 dBA
Maximum SPL
136dB (0.5% THD @ 1000Hz) 146dB with pad engaged
Equivalent Noise Level
17dB (A weighted EC651)< 16 dB
Output Connector
Male XLR 7 pin with special power supply and cables
High-Pass Switch
80 Hz 6dB/octave
Attenuation Switch
-10dB
Power Requirement
Dedicated PS-1 Power Supply, 115/230VAC selectable
Dimensions
237mm x 46mm (9.5" x 1.8")
Weight (BV-1 Mic Only)
8kg / 1.8 lb.
Finish
Polished Nickel trim / Buttercream Body